Have you ever experienced having a dead car battery in the middle of a traffic jam? Or perhaps have you been into a not familiar place with a dead car battery and you have to call a mechanic so you can start your car and drive home safely?
Or maybe you have been into a situation where you are in the middle of a long drive back to your relatives in the countryside, and it’s your first time that you don’t know who you can call? That’s a painful and annoying moment, isn’t it?
Especially if you don’t know how to start a dead car battery without jumper cables or anyone towing you back home or to the nearest auto shop.
That is why it is indeed a must that we know the basics on how to fix your car engine or car batteries to minimize problems like this. So the main question now is, how can you fix a dead car battery without anything?
There are different methods on how you can jump-start a car without jumper cables depending on what type of car engine you are driving. You can check the information below to see each method that you can use depending on if you have a manual or an automatic gears car.
1. Hill Push Method
2. Using a Battery Charger
3. Using a Solar Charger
Automatic Transmission Car
1. Rolling Down the Hill
Manual Vs. Automatic Transmission Cars
There are two types of car engines: manual and automatic. The question is, how do we perform the methods listed above to jump-start a dead car battery without jumper cables based on the engine type?
To answer that question, we must first discuss the difference in features between a manual transmission engine and automatic transmission engine. The variances between the two types are on a whole different level.
1. Automatic Transmission Gears
The automatic transmission has been around for quite a while, and they have been replacing the other older manual vehicles for the last several years. It is mainly accessible to new drivers, but not as much to those who have been driving for a long time.
An automatic transmission car has the following features:
Less complicated – The clutch that you can found in vehicles that have manual transmission gears makes it all difficult for newer drivers to master how to handle one. On the other hand, learning how to carry vehicles with automatic transmission engines takes a lesser amount of time; since all you need to learn is to shift gears in a timely manner without worrying about a clutch.
Safety – Since most new drivers drive around cars with automatic transmission engines, they know that keeping both hands on the steering wheel all the time could lessen the risk of accidents. That is something that you cannot do when driving a car with manual transmission engines.
Driving on a hill – If you are not an expert in driving, you will find it troublesome going through hilly areas with a manual transmission. On the other hand though, if you have an automatic transmission engine, it will be easier for you to drive through steeps with almost no difficulties at all.
Less stalling – As a driver, you will not like it when other drivers are looking at you while getting past through your vehicle as if you are the worst driver ever. This moment of embarrassment usually happens due to stalling. It will not repeat that much if you are driving an automatic transmission unless there is a problem with the car’s machine itself.
Less hassle in heavy traffic – Being stuck in heavy traffic is tiring. Add that to the constant need of cycling through starting and stopping a car with a manual transmission engine, and you will find yourself on an exhausting trip. Automatic transmission engines allow you to smoothly go through heavy traffic without much effort; significantly far from what you exert in driving a car with manual transmission engine.
2. Manual Transmission Gears
Budget-Friendly – Why purchase an automatic car that costs a hundred bucks more if you can just buy a manual version of the same model? If you are strict on your budget, there is really no reason for you not to pick a manual.
Maintenance – Maintaining an automatic is never cheap. With all the features and parts that are installed into an automatic, it will cost you an arm and a leg to keep it functioning smoothly. Manual engines do not require extravagant maintenance, and you will only spend a few bucks on most repairs. The most important part that you will need to take care of is the clutch. Just make sure that it doesn’t call quits, otherwise, you have a problem.
Fuel-friendly – Due to factors such as having more number of gears and being lighter, manual transmission engines consume significantly less fuel compared to automatic transmission engines. With that being said, you can go farther if you are driving a manual compared to when you are driving an automatic with the same amount of fuel. If you are into efficiency, then a manual is the choice for you.
Anti-thieves – With the few amounts of knowledge that most people have right now about manual transmission cars, owning one automatically gives you more immunity in being a victim of car-thieves. The roads are now being taken over by automatic cars and the chances of thieves knowing the ins and outs of a manual get slimmer every day.
Versatility – Running a car with a manual transmission engine virtually gives you total control over different situations. An automatic can only respond to the current situation and conditions presented in front of it, unlike a manual transmission that can adjust depending on the current situation and predicted approaching state.
Before we discuss the methods for manual transmission car, let’s consider first the terms like the clutch, gas pedal, and the brake.
Clutch – the clutch passes the energy from the car’s engine to allow smooth vehicle action or movement. You can usually see the clutch pedal on the right of the brake pedal. If it’s an automatic transmission car, there is only the accelerator and the clutch pedal.
Gas pedal – the gas pedal or accelerator manages the rate of the vehicle.
Brake – in a manual transmission car, the brake is the pedal on the middle. The position is always gas/accelerator, brake, and clutch.
Manual Transmission Car Methods
1. Hill Push Method
Hill Push Method or rolling down the hill method is one of the most basic and commonly used ways for drivers who are usually stuck because of a dead car battery in a hillside area. There are three different methods that you can use to perform the Hill Push method.
1.1. The hand brake method
First, what is the car’s hand brake?
It is often known as the parking brake. It is a hand-operated tool that is positioned on the center but you can also found between the driver seat and the entrance.
With this method, you need to put the pressure on the gas accelerator as you release the clutch lever while you free the handbrake along with the clutch.
To do this, you need to use the hand brake. As you rest on a hill, pull on the clutch accelerator and change it into first gear.
Next, you need to set the hand brake. Setting the handbrake enables you to stay held and strain the clutch treadle with your left foot while moving your right foot available to push the gas pedal.
Once you already set the hand brake, you need to put the clutch lever while you the pressure on the gas lever with your foot. When you need to move again, you need to start pushing the gas pedal.
The amount of steep place defines how much pressure you need to put on the gas pedal. You only need to remember that it requires a steady amount of pressure from your foot.
The higher the hill area is the higher the amount of pressure needs to exert from your foot.
1.2. Use the heel and toe method
Using this method enables you to simultaneously put pressure on the clutch, brake, and gas pedal – all of them, at the same time. While performing this method, the car gives gas while pushing the curb with the right foot. This method will ignite the car’s engine and will help start the car.
First, you need to push the clutch and brake lever at the same time.
Next, you have to put pressure on the gas lever using your heel. If you need to move forward in the car, just slip the heel of your right foot onto the gas accelerator while maintaining the toes of your right foot on the brake pedal. With this movement, you keep the car not moving while still utilizing the gas.
Third, release the clutch. As you give more stress to the gas accelerator using your right foot, gradually release the clutch lever.
Fourth, you need to put pressure on the gas accelerator. When you feel the clutch start to go into spur wheel, you can move your right foot onto the gas pedal.
After that, you can free the clutch slowly as you give way to the car to have some gas to move forward.
1.3. The clutch lever, brake, and gas accelerator foot method
This specific method is one of the most commonly used when starting a manual transmission vehicle on a hill. It is quite difficult to sync the force applied on the clutch and gas pedals, but once you get used to it, you can do it anytime and anywhere you are.
First, you need to put pressure on the clutch the brake pedal. Once you came to a stop, put pressure on the brake and the clutch levers at the same time with the same force. Please make sure that it changes into the first gear. With this method, the car should idle evenly as you wait.
Second, slowly release the clutch lever until you feel that the car start to go into gear. While doing it, you can move your right foot from the brake pedal to the gas.
Once there, put pressure on the gas accelerator. As you press onto the gas, you can release your left foot from the clutch lever.
Remember that steeper hills need more gas so you need to set your pressure on the gas lever depends on the steepness of the slope you are parked.
What if the car dies in the middle of a long road back home or in the city proper in the middle of the night where there is no present mechanic that you can call?
2. Using Battery Charger
So what if you are not stuck in a hilltop area or a steep one? What if your car stopped on a long road without any hills nearby? What can you do? Can you fix your dead car battery without any jumper cables?
Just in case your car stopped in a place where there is no steep area and only bungalow houses nearby, the above method won’t be appropriate. But if you got your battery charger with you, I am sure that will help you a lot.
You only need to find an AC plug nearby and attach the battery charger to the socket. Then voila! Once you have it charged for hours, you can definitely go back to driving again.
3. Using A Solar Charger
For a manual car, you can also try using a solar power charger to charge a dead car battery. You can just put the solar panel on the vehicle’s dashboard. Make sure that the solar panel is receiving enough sunlight for it to charge. You can load it for a few hours, and you will be able to start your car without the help of jumper cables.
Automatic Transmission Car
1. Rolling Down The Hill
For automatic transmission cars, unfortunately, there is only one method that you can use to jump-start your car without the jumper cables. You can use the ‘rolling down the hill method’ by following the same instructions or method of the manual car.
So mainly, the downside of this type of engine is when you are not in a hillside, you won’t be able to jump-start the car without the jumper cables. You need to make sure that your car’s battery is in excellent condition before going on long trips or driving around the city or nearby suburbs.
There are different ways on how to start a dead car battery without jumper cables. In this article, we have found out that it differs depending on what engine type your car has.
If it has a manual transmission car, you can try the following methods:
1. Hill push method
2. Using a battery charger
3. Using a solar charger
If you have an automatic transmission car, you can use the roll down the hill method. Unfortunately, you would need jumper cables if your car battery dies in a flat surface area.
It clearly shows that it is easier to start a manual car than an automatic transmission car due to those reasons.
I recommend you to also read these related articles below: