Smoke alarms have been considered as one of the most handy home security electronic devices that a lot of households use today. Due to their features, the best thing about these gizmos is that they can prevent the risk of fires.
These devices come in a variety of models, and every version has its various features to offer. One of the most common kinds of smoke alarms is the battery-powered ones, which can be annoying when their battery is about to die because they won’t stop chirping.
So, how do you get a smoke alarm to stop chirping without a battery? As I mentioned earlier, most smoke alarms are equipped with a backup battery. When this battery is dying or low on charge, it will start chirping, and it can be annoying since the noise it generates can’t be ignored.
The best thing you can do about the chirping of a smoke alarm is to go to the nearest electronics store in your and purchase a new replacement battery. And then replace the old battery in your smoke alarm with the new one you bought.
However, if you are unsure how to do it, you can contact the device manufacturer of your smoke alarm and ask them to send someone that can do it for you. You can also pay a third-party repair service to replace the battery of your smoke alarm for you.
However, if you want to save some money or you are in a tight budget, changing the battery yourself is your best option. The good news for you is that the process is not that difficult to carry out, and with the proper instructions to guide you, it can be an easy task that you can do without having any difficulties.
Finding yourself reading this article makes me assume that you are one of those people annoyed with a smoke alarm that keeps on chirping. You already had your answer a while ago, and you already know how to fix it.
However, if you don’t know how to do it or you’re in doubt, you might want to stick around for a bit as I will be providing a guide on how to replace the battery of a smoke alarm and a few helpful insights.
Guide on How to Change the Battery of a Smoke Alarm
The conventional smoke alarms are designed and engineered to have the same process when it comes to replacing their backup batteries.
In this section, I am going to walk you through the process and guide you on how to replace your smoke alarm’s battery. Before we begin, keep in mind that you will need to use a few appropriate tools like a screwdriver and a prying tool.
Here’s what you have to do.
1. Get an Appropriate Replacement Battery
Before you can replace the battery of your smoke alarm, you have to make sure that you get the appropriate replacement power cell compatible with your device. This is to ensure that the new battery that you will install will work perfectly with your device.
You have to keep in mind that most of the typical smoke detectors use a 9-volt battery. To be sure, you can get the model of your device or check your device’s owner’s manual and see for yourself what is the right battery for it.
2. Removing the Smoke Alarm’s Cover
The first thing you need to do if you are to replace the battery of your smoke alarm is to remove the cover of the device.
In this step, you might need to use a ladder or a table that can support your weight because you have to reach the device that usually installed on the ceiling. Use the screwdriver to unscrew that holds the cover in place, or in some cases; you might need a prying tool to pry the cover open.
After successfully removing the cover of the device, this will expose the internal components giving you access to its battery. There will be three main components inside, the loud horn, the sensor, and the power cell.
3. Replace the Power Cell of the Device
Now that you have access to all of the internal components of the smoke alarm, you can now replace the old battery with the new one you just bought. To do this, carefully unclip the old battery from its designated container and then replace it with the new one.
Smoke alarms typically use a 9-volt cell, and the replacement you have to use must be the same. Keep in mind that you have to place the new replacement battery the correct way, where the positive and negative terminals are in the proper place.
4. Reassemble the Smoke Alarm by Replacing the Cover
Once you have already replaced the old battery and then you have made sure that the replacement battery is securely placed.
You can now replace or reinstall the cover of the device. Again, if your smoke alarm has a screw that holds its cover into position, make sure to use the proper screw to hold the cover into its position securely. If the device has a pry-off designed, then you have to make sure that all the clip locks on edge are holding the cover to its position.
That is how you properly change the battery of a smoke alarm and stop it from chirping, which can be very annoying. Keep in mind that this guide that I imparted to you is based on the basic battery replacement process carried by experts for the conventional type of smoke detectors.
It may be different for other devices, but they will probably almost the same steps which won’t have any issue.
Removing the Smoke Alarm’s Battery to Stop It From Chirping
Another option you have to stop your smoke alarm from its non-stop chirping is to remove its battery. This will have almost the same steps from the replacement process, just getting rid of the step where the battery is replaced. However, this will only stop the device from generating the annoying noise and will render it useless.
If there’s a risk of fire on your home, it won’t have the ability to detect it and trigger the alarm. It will no have any means of warning the authorities or the household about an impending fire.
By doing this, you won’t have any fire protection on your house. That is why the most recommended thing you have to do is to replace the battery as soon as possible. This will get rid of the annoying chirping of the device and keep you home safe from any risk of having a fire.
In case, you are to remove the battery just to stop the chirping, make sure to replace the battery as soon as you can to retain your home protection.
The Average Life Expectancy of a Smoke Alarm Battery
Maybe you are wondering how long the battery of a smoke alarm can last. Well, according to a lot of experts and manufacturing companies.
A smoke alarm powered by a nine-volt battery should be replaced at least every six months, while the device can last for ten long years before it would need a new device replacement. If you want to make sure that your home is protected against any risk of fire, be sure to replace your smoke alarm battery every six months.
You might also want to keep in mind that you test your smoke alarm at least once a month to be sure that you keep it in top shape. This is a good practice that all homeowners should bear in mind because it is an upkeep step that will make sure your home is always protected from any kind of risk of having a fire.
Final Thoughts
See! It’s not that hard to replace the battery of the conventional smoke alarm and stop it from generating the very annoying chirping noise when it has a dying battery. All you need to do is to make sure you are getting the replacement cell and follow the guide I shared with you above, and you are good to go.
You also might want to take my advice, checking your device at least once a month to keep it in top shape. I hope this guide has been a good help to you.
